Purified Water and The Real Truth About Bottled Water,

Entregamos Agua Purificada en Las Condes libre de bacterias, parásitos, cloro, sodio y cualquier tipo de sustancia nociva. Haz tu pedido a domicilio llamando a nuestro número o completando el formulario y conoce las mejores promociones para que tú, tu familia y tu negocio disfruten de una mejor calidad de vida.

There’s a lot of incorrect information and a lot of misinformation regarding the benefits of bottled water, and value. Many Agua Purificada a Domicilio people and organizations have joined in the debate and the pros and cons have been widely discussed. As a result there has been a significant amount of misinformation being disseminated and debated.

Bottled water is a multi-billion dollar industry that is very popular. As more people lead healthier lives as well, so does the demand for the purchase of bottled water.

It is best to begin by defining the technical term “Purity”. Purity is typically expressed numerically as “Total Dissolved Solids”, or “TDS”, which measures the level of impurities that dissolve in water . TDS is calculated in terms of parts per million (ppm) or milligrams per liter (mg/l). The EPA stipulates that tap water must contain not more than 500 parts per million of impurities (of all types) . What is the reason this number isn’t the 0ppm limit?

Types Of Water

Two types of water that are consumed in the United States today: municipal water (also known as tap water) or bottles of water (including water from a spring, filtered and purified water). This article concludes that all taps and the majority of bottles of water are unsafe. Water that is purified is the only water that is truly safe to drink.

Here’s proof:

Tap WaterTap water is water that is provided by municipalities to large parts of the population. Many people are familiar with the tap water types.

The majority of drinking water that is available in the Northern Virginia- Washington Region originates from the ground, like the Potomac or the Occoquan Reservoir. Both of them are contaminated. The water source is treated using basic filtration techniques like sand filtration (filters out huge chucks of waste and other organic materials ) and flocculation (chemicals are added to cause smaller particles to coagulate, and then floating so they can be removed) and finally, chlorine is added to kill microorganisms and bacteria.

In most cases, tap is believed to be potable (drinkable) in accordance with EPA standards. Chlorine use is widely used and many people object to the smell and taste of water when chlorine is present.

What exactly are EPA Standards?

The Environmental Protection Agency (EPA) is the agency responsible for establishing standards for quality in the tap water. The EPA does not guarantee pure water but it can guarantee that the water is in compliance with certain standards (meaning it’s allowed to contain harmful pollutants and substances). Many municipalities publish annual glowing reports about meeting EPA Standards but these standards are arbitrary, not supported by science-based testing and can be a method for municipalities to create unhealthy drinking water.

The recent legislation proposed by Senator Hillary Clinton (D. NY) as well as other senators that would force the EPA to alter its standards to protect residents of New York from TCE which is a carcinogenic substance which is responsible for the contamination of the Long Island’s waterways. Senator Clinton declared that with regard to the EPA, “It is unacceptable for the EPA to fail to protect the public from TCE in light of stronger scientific evidence of its carcinogenic effects as well as increasing exposure concerns across New York and across America…Communities across New York continue being exposed to potentially harmful levels of TCE due to EPA delays.” The conclusion that one can draw from this bill is that EPA protection of our drinking water is a bit questionable at best.

Certain standards permit certain amounts of contaminants and harmful chemicals in the tap water. What is the difference between a little poison that is absorbed into your body continuously or a large amount of poison that is absorbed in a short period of time? It is possible to argue that both are detrimental to your health.

Many other questions arise regarding taps as well. How much poison can the human body take and what methods did the EPA determine the amount of contamination that is allowable and safe? How were tests conducted? What were the test procedures of the EPA? What happens to people who have weak immune systems?

These are just a few of the many questions that are unanswered.

Does Municipal (Tap) Really Safe?

The glowing reports from municipal sources notwithstanding tap water, it can be harmful to your health for many reasons:

* Chlorine isn’t particularly healthy for you – it has been linked to various cancers, however, it kills certain microorganisms that can make you sickly.

* A study conducted by the Associated Press revealed that pharmaceuticals are found in a vast amount of municipal products throughout the United States. Some municipalities don’t have tests for the presence of pharmaceuticals, or do not publish the results.

* Heavy metals pose an issue for municipal systems. Highly toxic metals like lead (particularly hazardous to children) and copper are found in many municipal systems because of the pipes in homes . These heavy metals can be found in water after it leaves the filtering plant. Washington. Washington. D.C. was cited for having excessive amounts of lead in its municipal water supply.

* The contamination of the municipal water supply was the reason for a recent outbreak Salmonella poisoning in Colorado.

* Cryptosporidium is a micro-organism that was found in municipal supply and tested for. In Wisconsin, an epidemic of cryptosporidium brought on by municipal waste was identified.

The option of fluoridation is available in many municipalities. However, the long-term effects of fluoride remain a matter of debate. Fluoride is a chemical which can harden teeth and stop decay. However, it is recommended that fluoride only be utilized in the dental chair, and not in the water supply to the public.

TDS in Washington DC tap water can range from 200 ppm up to 400+. The TDS range depends on a variety of factors, including the temperature of the water, flow, runoff and time of year (fertilizing grasses, etc.). Many other factors. The tap water supply is constantly changing in terms of quality, a fact that the majority of people don’t know and municipal water providers don’t disclose.

Leave a comment

Your email address will not be published.